QUESTIONS & ANSWERS
Ask a Question-
How to install?
Step 1 Lay a piece of paper on the edge of the door, use the paper to mark you have made in measuring the proper distance from the top of the door. Step 2 Bend or crease the paper on the scored line over the edge of the door. Mark the drill-point locations on the paper and mark these points on the location of the door. Step 3 Using a router or drill of the proper size, bore holes to required depth. Note: To minimize the observable gap between the door and the frame in single swing pass doors in the closed position, each half of the hinge can be mortised 1/32” below flush. Start each hole at the point indicated by the hole punched through the paper. Step 4 Using a router or chisel, remove wood to connect the holes for a smooth mortised surface. Step 5 Insert one-half of the hinge into mortise, install screws. Step 6 Repeat above steps to install hinge in jamb.